Question: Does SSID Name Matter?

Can a router have 2 SSID?

In order to have two SSIDs, the router’s firmware has to support it.

For example, D-Link DIR-825 has a “guest zone”, which is essentially a separate SSID that you can use.

You can choose whether you want the routing between zones enabled or not..

What is my SSID name and password?

The SSID is the name of your wireless network. This is what you will look for when connecting wireless computers and devices. The Password is the secret word or phrase you will enter when first connecting a device to your wireless network. Each computer or device you connect will need to use this password.

Why do I have 2 WIFI names?

When a router is labelled as dual band, it means it can encode and decode radio waves at both the 2.4GHz and 5GHz frequencies. … You might have also seen reference to wifi channels: These are connected to, but separate from, frequencies.

Should an access point have the same SSID?

It is permissible to have multiple AP with the same SSID. This is standard practice in a multi-AP environment. You just need to make sure they are on different channels. You can leave them broadcasting if they are both the exact same SSID, or you can disable the broadcast on the second and follow what Mike said.

What is a good WiFi network name?

Funny Wifi NamesMaking Wifi Great Again.FBI Surveillance Van.Abraham Linksys.John Wilkes Bluetooth.Stop Being A Mooch.The LAN Before Time.Nacho WiFi.It Burns When IP.More items…•

Should I use the same SSID for 2.4 and 5ghz?

Unless you force your client device to choose a specific SSID, it will usually choose the one with the strongest received radio signal. So, if you use the same SSID for both 2.4G and 5G, more than likely the 2.4G radio, which has a longer range and passes through walls and floors better, will be the stronger signal.

Should I change SSID name?

The SSID (Service Set IDentifier) is the name of a wireless network. … You should change the default SSID(s), for a couple reasons, one technical one not. Using a default or common SSID, can make it easier for bad guys to crack the WPA2 encryption.

Where is the SSID on the router?

Look for a sticker on your router. Many routers provided by Internet Service Providers have a sticker on the bottom or side, listing the default SSID. This is usually labeled as the SSID or “Network Name” and may be located next to a barcode.

What should I name my SSID?

Change your network name (SSID) “Abraham Linksys”, “Bill Wi-The Science-Fi”, “Not Your WiFi”… Select a name for your WiFi that is unique (and if you want, humorous). It is important to change your network’s default name as it can give away your internet provider.

What is SSID example?

A Wi-Fi network’s SSID is the technical term for its network name. For example, if you see a sign telling you to join a network with an SSID of “Airport WiFi”, you just need to pull up the list of wireless networks nearby and join the “Airport WiFi” network.

How do I create a SSID?

Select Settings > Wi-Fi > Add Wi-Fi network. Enter the network name (SSID), security type, and password. Tap Connect.

Can 2 routers have the same SSID?

You can run two routers with the same SSID to increase the range of your Wi-Fi network, but you must set up one router to handle the network administration and the other to act as a bridge back to the primary router.

How do I rename my SSID?

To change the name of your WiFi network (also known as SSID, or Service Set Identifier), you need to enter your router’s admin page.Enter your router’s IP address into your favorite web browser.Log in as the administrator.Go to settings and look for an option titled “WiFi name” or “SSID”.Enter your new WiFi name.More items…

How long can an SSID be?

32 charactersThe technical term for a Wi-Fi network name is the Service Set Identifier, commonly referred to as the SSID. As defined in the 802.11 standard, an SSID can be up 32 characters long.

What is dual SSID?

In Multi-SSID mode, the access point creates multiple wireless networks to provide different security and VLAN groups. This mode is suitable when you want your devices connected to different wireless networks and become isolated by VLANs. … Log in the web-based management of the Access Point.

What should you not name your WIFI?

Don’t include personal information such as names, addresses, or birthdays. Don’t use any part of the router password as the name. Do make the SSID unique and memorable, so you don’t forget it.

Does SSID length matter?

According to the documentation of the standard, the length of an SSID should be a maximum of 32 characters (32 octets, normally ASCII letters and digits, though the standard itself doesn’t exclude values). Some access point/router firmware versions use null-terminated strings and accept only 31 characters.

Is SSID and WiFi name the same?

SSID is simply the technical term for a Wi-Fi network name. … You’ll see this name when you connect your devices to your wireless network. WPA2 is a standard for wireless security, and is the default type of wireless security Bell Wi-Fi uses.